In today’s highly digitalized era, blue light glasses have become a must-have eye protection tool for many people. We use mobile phones, computers and other electronic devices every day, and the damage to the eyes caused by long-term exposure to blue light has attracted more and more attention. The emergence of blue light glasses effectively reduces this harm and protects our eyes from blue light. However, with the increase in frequency of use, stains, fingerprints, grease and other problems on blue light glasses are inevitable, which affects the light transmittance of the lenses and weakens their protective effect. Therefore, keeping glasses clean can not only improve wearing comfort, but also ensure the performance of their protective function.
Here, we summarize 6 simple and easy ways to clean blue light glasses for you to help your glasses stay clear at all times and give your eyes the best protection.
Table of Contents
Basic cleaning: First step: rinse with clean water
Rinsing with clean water is the first step to clean blue light glasses, and it is also the simplest and most basic method. In fact, with just a little patience, you can easily clean the dust and impurities on the lenses. First, turn on the faucet and remember to adjust the water flow a little bit, preferably a trickle, so as to avoid the water flow being too fast and making the glasses messy. Hold the glasses and keep the lenses at an angle of about 45 degrees to the water flow. Starting from the top of the frame, slowly move the water flow downward to ensure that the water flow evenly rinses the front and back of the lens, easily taking away those dust and tiny impurities.
In this process, don’t forget to clean the frame and temples. The corners and nose pads of the frame often hide some grease and dirt, so pay special attention to these small details. When rinsing with water, you don’t need to use too much force, and the action must be gentle. Because the lenses of blue light glasses are usually coated, this layer of film is very fragile, and excessive force may damage it and affect the anti-blue light effect of the lens. Therefore, we should avoid too much water flow or too much friction to avoid scratching the lens.
In addition, when rinsing the frame, you can also gently touch the nose pads and the bends of the temples with your fingers to see if there is any dirt, and make sure that the water flow can thoroughly clean these places. The whole process is like giving the glasses a gentle “bath”. Don’t worry too much. As long as you pay attention to the details, the glasses will soon become clean as new.
Finally, remember to rinse all places with clean water to remove residual dust and impurities, and then gently wipe them with a soft cloth. After doing this, the glasses are ready, clear, comfortable, and can better protect your eyes.
Although this method is simple, it is the basis of daily cleaning. Whenever the glasses are slightly dirty, the best thing to do is to rinse them with clean water to keep them fresh and clean.
There is a trick to deep stain removal, wiping with neutral detergent
Sometimes, the stains on the glasses are stubborn, and it is not enough to just rinse with water. For example, grease, sweat stains, fingerprints, etc., water often cannot completely remove them. At this time, neutral detergent becomes a great savior! However, don’t use ordinary detergents or detergents containing alcohol, which may damage the coating of the glasses. We need to find a mild detergent designed specifically for glasses, or a relatively mild detergent (remember to dilute it first), so as to ensure that the lenses are not damaged while cleaning.
The cleaning steps are actually quite simple. First, find a clean small basin, add a small amount of neutral detergent, and then pour in warm water. The water temperature should be about 30℃, not too hot. Then, stir gently to mix the detergent and water evenly. Next, take a soft, clean cloth, dip it in the detergent solution, and gently wipe the lens in a circular motion, starting from the center of the lens and moving to the edge little by little. Don’t use too much force, just wipe it gently. During the wiping process, it is best to keep in one direction and avoid going back and forth, which can reduce damage to the lens.
The frame should not be ignored. The nose pads of the frame, the edges of the frame, and the gaps between the lens and the frame are particularly prone to dirt. These places are usually the hardest hit by grease accumulation. Wipe these details carefully with a little more force. However, remember not to use too much force to avoid scratching or damaging the material of the frame. The temples should also be wiped clean, especially the bends.
After wiping the lenses and frames, rinse the detergent thoroughly with clean water without leaving any residue. Finally, take a clean lens cloth or soft paper towel and gently wipe the moisture off the glasses. If there is no special lens cloth, you can use paper towels, but make sure that the paper towels do not contain small particles to avoid scratching the lenses.
The method of cleaning with neutral detergent is very suitable for solving those stubborn stains that cannot be removed by conventional cleaning methods, and this step can help you remove grease, sweat stains and other dirt more deeply, so that your glasses can be restored to a fresh and clear state. This not only keeps the lenses at their best visual quality, but also ensures that the lenses’ blue light protection continues to be effective.
Precise cleaning and more protective glasses with special cleaning agents
When cleaning blue light glasses on a daily basis, special cleaning agents are undoubtedly a very practical tool. Compared with water or neutral detergents, special cleaning agents are more professional and can remove stains more effectively. At the same time, they are gentler on the lenses and coatings of the glasses, and the cleaning effect is more significant. Especially when there are stubborn fingerprints and grease on the lenses, or when you want to clean more thoroughly, special cleaning agents are really a good choice.
First, we have to prepare special glasses cleaning fluid. These cleaning agents are usually designed very professionally. Cleaning fluids from brands such as Zeiss and Essilor are very popular because they can not only clean effectively, but also protect the coating of the lenses to the maximum extent. You can pay attention when buying and choose those verified products, so that you can use them more safely.
The method of using special cleaning agents is actually not complicated. The first step is to lay the glasses flat on a clean surface, preferably a table or a clean cloth, with the lenses facing up. Then, pick up the cleaning agent and spray it evenly 1 to 2 times at a distance of about 10 to 15 cm from the lenses. Keep the nozzle perpendicular to the lens when spraying, so that the cleaner can be evenly covered on the lens surface. If you spray unevenly, it may leave spots or residues, affecting the cleaning effect.
After spraying the cleaner, give it a few seconds to give it enough time to “say hello” to the stains on the lens and dissolve the grease and dirt. After waiting for about 5 to 10 seconds, you can start wiping. Use a special glasses cloth or other soft cloth without lint, starting from one end of the lens, gently wipe in one direction. It is best not to wipe back and forth, which will prevent the stains from sticking to the lens again. When wiping the frame and temples, you can also use a cloth sprayed with cleaner to gently wipe, paying attention to details, especially the nose pads and the edges of the frame.
At this time, the lens should be very clean, and the residue of the cleaner will evaporate automatically. There is no need to rinse with water, and you don’t need to wipe too hard to avoid scratching the lens. If you find water stains or stains in some places when wiping, you can wipe it gently again with a clean cloth until it is completely removed.
The benefit of using a special cleaner is not only that it can remove stains, but also effectively maintain the lens coating and extend the service life of the glasses. After all, we all know that the coating of glasses plays an important role in blue light protection, UV protection and other functions, and the correct cleaning method can maximize these functions.
In summary, a special cleaner is your “right-hand man” in cleaning glasses, especially suitable for glasses that require delicate care. By using it correctly, you can not only remove stubborn stains on your glasses, but also ensure that the lenses remain clean and clear for a long time, while protecting the lenses from damage, so that your blue light glasses are always in the best condition.
Use a lens cloth to wipe dry and gently protect against scratches
When cleaning blue light glasses, the choice and use of lens cloth are really important. Many people may think that just wipe with any cloth, but in fact, the wrong cloth not only cannot wipe clean, but may also damage the lens. For example, towels and paper towels are not suitable for wiping glasses, because their fibers are relatively rough and easily carry dust or particles. When wiping, it is like rubbing sandpaper on the lens, which will cause tiny scratches on the surface of the lens. Over time, the coating of the lens will be worn and even affect the use of the glasses, especially the blue light protection function.
So, what is the best choice? The answer is-special lens cloth. This kind of cloth is usually made of microfiber, which is much finer than ordinary cloth, soft and does not hurt the lens. And it is particularly absorbent and can easily absorb moisture, oil stains and dust on the surface of the lens. Most importantly, it will not cause any scratches on the lens, so it can maximize the protection of the coating of the glasses and maintain the clarity and function of the glasses.
There are also some tips when using a lens cloth to dry glasses. First, after getting the glasses, gently shake off the moisture on the lenses. Be gentle when shaking, and avoid excessive force that causes the glasses to slip. Next, cover the lenses with a clean lens cloth, and then gently wipe them in one direction, try to start from the center of the lens, and wipe them clockwise or counterclockwise. Avoid wiping back and forth, because this will not only make it easy for dust to reattach to the lenses, but may also leave scratches.
When wiping the lenses, be gentle, don’t use too much force, and slowly absorb the moisture. Pay special attention to wiping the frame and temples. Small parts such as the edges of the frame and the nose pads are especially prone to dirt and dirt, so you need to pay special attention. The bends of the temples should also be wiped, because these places are usually more prone to dust or grease accumulation. It is best to keep your movements gentle when wiping, and wipe them clean once, and don’t wipe them repeatedly.
After wiping the lenses, you can put them in a ventilated and dry place to dry for a while to ensure that they are completely dry. During this process, avoid the lenses from contacting rough surfaces, such as desktops or tablecloths, to prevent dust from getting on the lenses. To prevent the lenses from coming into contact with dust on the table, you can place a clean paper towel or cloth on the table. Generally, after about 15 to 30 minutes of drying, the lenses will be completely clean and ready to wear.
In general, using a lens cloth to dry your glasses is not only a gentle care for the lenses, but also an important step to extend the life of your glasses. As long as you maintain this good habit, your blue light glasses will remain clear and bright, continue to provide strong protection for your eyes, and allow you to enjoy a comfortable visual experience in the digital world.
Drying and sterilization are both possible
When it comes to drying glasses, many people may be accustomed to using towels, paper towels and the like to dry them directly, but this is not necessarily the best way. First of all, the fibers of towels or paper towels are relatively coarse and may carry some small particles. Once these small particles are rubbed on the lenses, scratches will be produced. Over time, the coating of the glasses will be damaged, and the anti-blue light function of the glasses may also be affected.
The best way is to dry them naturally. Simply put, let the glasses dry naturally in the air, don’t be impatient, and give it some time. In fact, many times we don’t need to rush to use glasses, nor do we need to let them dry immediately. Giving glasses a breathing space can protect the lenses and frames and extend their service life.
The correct way to dry naturally is to rinse the glasses with clean water first and shake off the moisture on the lenses, but be gentle and don’t shake them hard. Then, find a clean place, preferably a ventilated place, lay the glasses flat and let them dry naturally. Many people may put their glasses in the sun, but this is not a good idea. Strong sunlight can make the lens coating fragile and may also change the material of the frame, especially for glasses with plastic frames. A better approach is to place the glasses in a ventilated place indoors, away from direct sunlight, such as a windowsill or a table, but avoid direct sunlight.
When placing them, you can let the lenses face down and the frames face up, so that the moisture in the frames can flow out naturally and dry faster. In addition, placing the lenses facing down can also prevent dust from falling on the lenses and keep them clean. If you are worried that the lenses will get dusty when they touch the table, you can put a clean paper towel or cloth underneath to ensure that the lenses are not affected.
Usually, glasses can be dried completely in a ventilated place for 15 to 30 minutes. If it is a humid environment, you may have to wait a little longer. After the glasses are completely dry, you can wear them with confidence and continue to enjoy the eye protection they bring.
Natural drying not only avoids scratches when wiping, but also keeps the glasses clean and sterile. After all, bacteria and moisture in the air can also be taken away during the drying process, so this method is not only for cleaning, but also for health. Whenever we finish washing our glasses, we let them air for a while and give them enough time and space. In fact, we are taking care of our eyes and providing better protection for both the glasses and ourselves.
Regular professional maintenance guarantees long life
Although we usually do a lot of work to clean our glasses, sometimes, the “deep cleaning” and maintenance of glasses still need to be handed over to professionals. After all, glasses also have “maintenance needs”, especially those blue light glasses that are worn more frequently. Going to a professional optical shop for a comprehensive inspection and maintenance every once in a while can not only keep the glasses in the best condition, but also extend their service life.
In fact, the professional maintenance service provided by the optical shop is very helpful, especially in those subtle places. For example, the connection between the frame and the lens of the glasses, the inside of the nose pads, or the bend of the frame, these places are difficult to clean by ourselves. Optical shops usually use ultrasonic cleaning machines to remove invisible dirt, grease, bacteria, etc. on the glasses through ultrasonic vibrations. You can imagine that those seemingly clean corners actually hide a lot of dirt, and professional cleaning can ensure that every corner of the glasses is thoroughly cleaned.
Not only that, the professional services of the optical shop also include inspection of lens coating. If your blue light glasses are used for a long time, the coating may be damaged, which will directly affect the anti-blue light effect. Through professional inspection, optometrists can find problems in time and give suggestions for repair or replacement to ensure that the blue light protection function of glasses is still fully utilized.
In addition, after long-term wearing, the frame of glasses may be deformed due to frequent angle adjustment or collision. The deformation of the frame not only makes the glasses uncomfortable, but also may affect the distance between the lens and the eyes, which in turn affects the vision correction effect and blue light protection. Therefore, professional optometrists in optical shops will check the shape of the frame to ensure the wearing comfort of the glasses, and make professional adjustments if necessary. In this way, you will not feel oppressive when wearing glasses, and your nose bridge and ears will be more comfortable.
Many people may think that it is a bit troublesome to send them for professional maintenance regularly, but in fact it is an investment. As long as they are maintained every 3 to 6 months, the glasses can always be kept in the best condition, which not only makes the eyes more comfortable, but also effectively extends the service life of the glasses. Especially for those who need to use blue light glasses for a long time, regular maintenance is actually an important step to ensure eye health.
So, don’t forget to “do a physical examination” for your blue light glasses. Through professional maintenance, glasses can better protect your eyes, extend the use cycle, and ultimately escort your eye health.
Conclusion
Keeping blue light glasses clean not only improves wearing comfort, but also ensures that the blue light protection function of the glasses always effectively protects our eyes. With these 6 simple and easy cleaning methods, you can easily maintain your blue light glasses and extend their service life. Don’t forget that glasses are not only a tool to protect your eyes, but also a part of our healthy life. Regular cleaning and professional maintenance can keep them escorting your eyes at all times.
